Logitech ERGO K860 Software Updater

- July 16, 2020
Logitech ERGO K860
Download-Soft.net to install drivers and software for Windows and MacOs easily here, we provide complete services with one click, and we will continue to download the latest so your device runs without a hitch. Complete your work with full support at all times. Speed ​​and stability are the priority in every business, here is the first step to complete it, develop new things in a device for better. If there are obstacles, please contact us.

Troubleshooting for connection issues 
Symptom(s):
  • Device connection drops
  • Device doesn’t wake up computer after sleep
  • Device is laggy
  • Delay when the use of the device
  • Device cannot be linked at all

Likely Cause(s):
  • Low battery levels
  • Plugging the receiver into a USB hub or different unsupported tool which include a KVM switch
  • NOTE: Your receiver should be plugged without delay into your pc.
  • Using your wi-fi keyboard on steel surfaces
  • Radio frequency (RF) interference from different sources, along with wireless speakers, cell phones, and so on
  • Windows USB port power settings
  • Potential hardware issue (tool, batteries or receiver)

Wired gadgets
1. Plug the tool into a specific USB port on your pc. If possible, don't use a USB hub or other similar tool. If the use of a exceptional USB port works, try updating the motherboard USB chipset driver.
2. Windows only — Disable USB Selective Suspend:
  • Click Start > Control Panel > Hardware and Sound > Power Options > Change Plan Settings > Change Advanced Power Settings > USB Settings > USB Selective Suspend Setting.
  • Change both settings to Disabled.
3. Update firmware if available.
4. Try testing the tool on a extraordinary pc.

Unifying and non-Unifying gadgets
1. Verify the product or receiver is related directly to the pc and not to a hub, extender, transfer or some thing similar.
2. Move the tool towards the USB receiver. If your receiver is in the lower back of your computer, it can help to relocate the receiver to a front port. In some instances the receiver signal gets blocked by way of the laptop case, inflicting a delay.
3. Keep other electrical wireless gadgets far from the USB receiver to keep away from interference.
4. Unpair/repair or disconnect/reconnect hardware:
  • If you have a Unifying receiver, recognized with the aid of this logo, Unifying Logo see Unpair a mouse or keyboard from the Unifying receiver.
  • If your receiver is non-Unifying, it can not be unpaired. However, when you have a replacement receiver, you can use the Connection Utility software to perform the pairing.
5. Update the firmware for your tool if available.
6. Windows only — check if there are any Windows updates going for walks in the background that may reason the delay.
7. Mac only — test if there are any historical past updates that may motive the delay.
8. Try on a special computer.

Bluetooth device doesn’t work after computer wakes from sleep mode 

Windows
1. In the Device Manager, exchange the Bluetooth wireless adapter strength settings:
  • Go to Control Panel > System and Security > System > Device Manager
2. In Device Manager, amplify Bluetooth Radios, right-click on on the Bluetooth wi-fi adapter (ex. Dell Wireless 370 adapter), after which click Properties.
3. In the Properties window, click the Power Management tab and uncheck Allow the pc to show off this tool to save strength.
4. Click OK.
5. Restart your computer to use the alternate.

Macintosh
1. Navigate to the Bluetooth desire pane in System Preferences:
  • Go to Apple Menu > System Preferences > Bluetooth
2. In the bottom-proper nook of the Bluetooth preference window, click on Advanced.
3. Make sure all three alternatives are checked:
  • Open Bluetooth Setup Assistant at startup if no keyboard is detected
  • Open Bluetooth Setup Assistant at startup if no mouse or trackpad is detected
  • Allow Bluetooth devices to wake this pc

NOTE: These options ensure that Bluetooth-enabled devices can wake your Mac, and that the OS X Bluetooth Setup Assistant will release if a Bluetooth keyboard, mouse or trackpad isn't detected as connected for your Mac.
4. Click OK.

Logitech ERGO K860 Support 
 Windows 10, 8, 8.1 (32/64-bit) , macOS 10.15, 10.14, 10.13, 10.12.
Firmware And Software For Windows
Logitech ERGO K860 Firmware Update Tool
DOWNLOAD
The Firmware Update Tool, allows you to update your Logitech wireless receivers and select keyboards to the latest firmware.
Software Version: 1.2.169
Last Update: 2019-08-20
OS: Windows 7,Windows 8,Windows 10
File Size: 13.3 MB
Logitech ERGO K860 Firmware Update Tool
DOWNLOAD
The Firmware Update Tool, allows you to update your Logitech wireless receivers and select keyboards to the latest firmware.
Software Version: 1.2.169
Last Update: 2019-08-20
OS: Windows 7,Windows 8,Windows 10
File Size: 14.7 MB
Logitech ERGO K860 Firmware Update Tool
DOWNLOAD
The Firmware Update Tool, allows you to update your Logitech wireless receivers and select keyboards to the latest firmware.
Software Version: 1.2.169
Last Update: 2019-08-20
OS: Windows 7,Windows 8,Windows 10
File Size: 13.3 MB
Logitech Sync Downloads 
DOWNLOAD
Software Version: 2.2.87
Last Update: 2020-07-01
OS: Windows 10
File Size: Win 191MB
Logitech Sync Downloads
DOWNLOAD
Software Version: 2.2.87
Last Update: 2020-07-01
OS: Windows 10
File Size: Win 191MB
Logitech Connection Utility
DOWNLOAD
Restores the connection between devices and non-Unifying wireless receivers
Software Version: 2.30.9
Last Update: 2018-06-05
OS: Windows 8, Windows 7, Windows 10
File Size: 1 MB
Firmware And Software For Mac Os
Logitech ERGO K860 Firmware Update Tool
DOWNLOAD
The Firmware Update Tool, allows you to update your Logitech wireless receivers and select keyboards to the latest firmware.
Software Version: 1.0.69
Last Update: 2019-10-04
OS: macOS 10.12,macOS 10.13,macOS 10.14,macOS 10.15
File Size: 3.8 MB
Logitech Sync Downloads 
DOWNLOAD
Software Version: 2.2.87
Last Update: 2020-07-01
OS: macOS 10.15,macOS 10.14,macOS 10.13
File Size: Mac 197MB
Logitech Control Center for Macintosh OS X
DOWNLOAD
LCC lets you customize your mouse and keyboard on your Mac.
Software Version: 3.9.11
Last Update: 2019-12-18
OS: macOS 10.15,macOS 10.14,macOS 10.13
File Size: 17.4 MB
 

Start typing and press Enter to search